Skip to product information
1 of 3

LM393 Sound Detection Sensor Module (3.3V–5V) Digital Output

LM393 Sound Detection Sensor Module (3.3V–5V) Digital Output

🔥 1 sold•✓ In stock
Regular price $86.00 TWD
Regular price Sale price $86.00 TWD
Sale Sold out
Shipping calculated at checkout.
Quantity

Short Product Description

This LM393 Sound Detection Sensor Module is a compact digital acoustic switch designed for Arduino, ESP32, and Raspberry Pi projects. Operating on 3.3V to 5V DC, it uses an electret condenser microphone and an onboard LM393 comparator to detect when ambient sound crosses a user-adjusted threshold. It outputs a clean digital high/low switching signal (0 or 1) on its OUT pin, making it ideal for building clap-activated switches, sound triggers, and DIY alarm circuits.

Key Features

  • 3.3V–5V Wide Compatibility: Connects directly to both 3.3V (ESP32/Raspberry Pi) and 5V (Arduino/51 MCU) logic systems via 3 pins (VCC, GND, OUT).
  • Adjustable Trigger Threshold: Built-in blue potentiometer lets you easily tune sound sensitivity for different environments.
  • LM393 Comparator Output: Delivers a clean digital switching signal (0/1), capable of reading via MCU I/O or driving a compatible relay module.
  • Dual Status LEDs: Features separate power and switch-trigger LEDs on the PCB for rapid bench debugging.
  • Compact Mounting Footprint: Small 3.2cm x 1.7cm PCB includes a fixed bolt hole for secure installation in DIY housings.

Full Product Description

Threshold-Based Sound Detection for DIY Projects

This sound detection module monitors ambient sound intensity and converts it into a clean digital switching signal (0 or 1) for microcontrollers. When background noise stays below your preset threshold, the OUT pin remains at a HIGH logic level; once a clap, knock, or loud sound exceeds the threshold, OUT switches to LOW and the onboard trigger LED lights up. Because it operates on 3.3V to 5V DC, you can wire VCC, GND, and OUT directly to both 3.3V boards (ESP32, Raspberry Pi) and 5V microcontrollers (Arduino Uno, 51 MCU).

Adjustable Sensitivity and Direct Relay Driving

An onboard blue trimmer potentiometer lets you calibrate the trigger threshold using a small screwdriver to match quiet rooms or noisy workshops. Built around an LM393 comparator IC, the OUT pin can also connect directly to a compatible active-low relay module to create a standalone sound-activated switch without needing a microcontroller. Measuring 3.2cm x 1.7cm with a center mounting hole, the board installs cleanly inside small project enclosures.

Technician Tip

Understand the exact capabilities of this sound sensor before starting your build so it matches your project requirements. Our technicians at Sun Cheong emphasize that this 3-pin module is strictly a digital threshold switch—it only detects whether sound has crossed a loudness threshold, and cannot measure exact decibel levels, recognize frequencies, or record voice audio. When testing a clap switch, turn the blue potentiometer slowly until the trigger LED just turns off in a quiet room, then clap to confirm clean LOW-level switching.

Technical Specifications

  • Comparator IC: LM393
  • Operating Voltage: 3.3V – 5V DC
  • Output Type: Digital Switching Output (0 and 1; LOW when triggered, HIGH when quiet)
  • Sensitivity Adjustment: Onboard blue trimmer potentiometer
  • Interface Pins: 3-Pin Header (VCC, GND, OUT)
  • Indicators: Power LED, Digital Output Switch LED
  • PCB Dimensions: 3.2cm x 1.7cm
  • Mounting: 1x Fixed bolt hole

Delivery Options

  • Local delivery within Hong Kong and in-store pickup.​
  • Free shipping for orders of HK$400 or above; HK$35 shipping fee for orders below HK$400.​
  • Shipped by SF Express, usually dispatched the same day for orders confirmed before 6:00 PM (Mon–Sat).​
  • Estimated delivery time: 1–3 business days after dispatch (Hong Kong).​
  • In-store pickup details (location and time) will be confirmed by email or phone message.​
  • Delivery times are estimates and may be affected by weather or unforeseen circumstances.​

FAQ Section

  • Can this sound detection sensor measure exact decibels (dB) or record voice audio?No, this sensor is a digital threshold switch that only detects whether ambient sound exceeds a set level, and cannot measure decibels, recognize frequencies, or record audio.
  • How is this 3-pin sound sensor module different from a 4-pin sound sensor?This 3-pin module provides only a digital OUT switching signal (0/1), whereas 4-pin sound modules include an additional analog (A0) output pin for reading raw microphone waveform voltage.
  • How do I adjust the sensitivity if the trigger LED stays constantly on or never lights up?Use a small Phillips screwdriver to turn the blue potentiometer until the trigger LED turns off in your ambient room noise, then test with a clap or snap to verify it triggers.
  • Can I pick up this sound sensor along with relay modules and DuPont wires at your Sham Shui Po store?Yes, you can pick up this sound sensor module together with compatible 5V relay boards, jumper wires, and microcontrollers at our Sham Shui Po shop (新昌電腦有限公司).
  • Does the OUT pin go HIGH or LOW when a loud sound is detected?When ambient sound stays below the threshold, OUT outputs HIGH; when sound exceeds the threshold, OUT switches to LOW.

Target Users / Applications

  • Arduino and STEM students building clap-on desk lamps, sound-triggered relays, or noise-warning indicators.
  • Makers adding simple acoustic wake-up or knock-detection triggers to robotics and smart home prototypes.
  • Hobbyists constructing standalone sound-activated switches by pairing this module directly with an active-low relay module.
View full details