Quick Splice Lever Wire Connectors | 2/3-In to 4/6-Out

Short Product Description

These quick splice lever wire connectors provide a secure, tool-free solution for splitting electrical circuits. Available in 2-in-4-out, 2-in-6-out, and 3-in-6-out configurations, they safely handle up to 32A and 250V. Compatible with both solid wires (up to 4mm²) and stranded wires (up to 2.5mm²), they are perfect for lighting installations, junction boxes, and DIY electronics, ensuring a reliable connection without the need for electrical tape.

Key Features

Multiple Configurations: Choose from 2-in-4-out, 2-in-6-out, or 3-in-6-out to match your specific parallel wiring needs.
Tool-Free Installation: The lever-nut mechanism allows for quick wire insertion and removal without the need for screwdrivers or crimping tools.
High Power Capacity: Safely supports up to 32A and 250V, making it suitable for demanding electrical applications.
Broad Wire Compatibility: Accepts solid/hard wires (0.08-4mm² / 28-12 AWG) and stranded/soft wires (0.08-2.5mm² / 28-14 AWG).
Heat Resistant Housing: Operates safely in ambient temperatures up to 60°C and withstands internal heat up to 105°C.
Reusable Design: Wires can be easily released by lifting the lever, allowing you to reuse the connector for future modifications.

Full Product Description

Tool-Free Circuit Splitting for Fast Installations

These lever-operated connectors eliminate the need for twisting wires or using electrical tape, allowing you to split circuits safely in seconds. Simply strip the wire, lift the color-coded lever, insert the conductor, and snap it closed for a secure mechanical and electrical connection. The independent clamping springs ensure that each wire is held firmly in place, making future circuit modifications or troubleshooting incredibly easy.

High-Capacity 32A Rating for Safe Power Distribution

Rated for up to 32A and 250V, these terminal blocks safely handle high-current household and commercial wiring tasks. The internal conductive metals ensure low electrical resistance, while the flame-retardant housing withstands internal operating temperatures up to 105°C. Whether you are wiring a high-draw appliance or a complex lighting array, these connectors provide peace of mind inside enclosed junction boxes.

Technician Tip

Always ensure the wire is stripped to the correct length (approximately 9-10mm) before insertion so no bare copper is exposed outside the plastic housing. If you are wiring a complex smart home relay system and need help calculating your load distribution, our staff at Sun Cheong Computer Co. Ltd. (新昌電腦有限公司) in Sham Shui Po can help you select the exact combination of 2-in and 3-in connectors to keep your junction box organized and safe.

Technical Specifications

Connector Type: Quick splice lever terminal block
Available Configurations: 2 in 4 out / 2 in 6 out / 3 in 6 out
Maximum Voltage: 250V
Maximum Current: 32A
Supported Solid Wire (Hard): 0.08 - 4 mm² (28 - 12 AWG)
Supported Stranded Wire (Soft): 0.08 - 2.5 mm² (28 - 14 AWG)
Maximum Operating Temperature: 105°C (221°F)
Maximum Ambient Temperature: 60°C (140°F)

Delivery Options

Local delivery within Hong Kong and in-store pickup.
Free shipping for orders of HK$400 or above; HK$35 shipping fee for orders below HK$400.
Shipped by SF Express, usually dispatched the same day for orders confirmed before 6:00 PM (Mon–Sat).
Estimated delivery time: 1–3 business days after dispatch (Hong Kong).
In-store pickup details (location and time) will be confirmed by email or phone message.
Delivery times are estimates and may be affected by weather or unforeseen circumstances.

FAQ Section

Can I mix solid and stranded wires in the same connector?

Yes, you can mix different wire types and sizes. Each port has an independent clamping spring, allowing you to securely connect a thick solid wire in one port and a thin stranded wire in another without any loss of grip.

How are these different from traditional twist-on wire nuts?

Lever connectors allow for independent clamping, visual inspection of the connection, and easy removal without damaging the wire strands. They also prevent the common issue of wires slipping out, which frequently happens with poorly twisted wire nuts.

How much insulation should I strip off the wire before inserting it?

You should strip approximately 9 to 10mm of insulation from the end of your wire. This ensures the bare copper reaches deep into the internal metal clamp without leaving any exposed conductive material outside the plastic housing.

Are these suitable for standard Hong Kong 13A ring circuits?

Yes, these connectors are highly suitable for standard 13A circuits. With a maximum rating of 32A and 250V, their power handling capabilities safely exceed the requirements for standard Hong Kong wall sockets and lighting circuits.

Can I reuse these connectors if I make a wiring mistake?

Yes, these connectors are fully reusable. If you need to change a circuit or fix a mistake, simply lift the color-coded lever to 90 degrees, pull the wire out, and the connector is ready to be used again.

Target Users / Applications

Lighting Installers: Splitting a single mains power feed into multiple LED downlights in a ceiling void.
Smart Home DIYers: Organizing neutral and live wires inside crowded wall switch back-boxes when installing smart relays.
Automotive Electricians: Creating secure, vibration-resistant power distribution blocks for 12V/24V vehicle accessories.
Prototyping Makers: Quickly connecting and disconnecting components on a test bench without soldering.