Name: 2-in-1 M.2 & mSATA to SATA Adapter | SSD Enclosure 2.5"
Brand: Sun Cheong Computer Company Limited
SKU: 21ST000563
Price: 157.0 TWD
Availability: InStock

Short Product Description

Don't let your spare M.2 or mSATA drives gather dust. Instantly convert them into a standard 2.5-inch SATA III SSD for your laptop or desktop. This 2-in-1 adapter features a dedicated mode switch, allowing you to easily reuse old drives for storage expansion, system upgrades, or emergency data recovery. Note: Supports SATA Protocol M.2 only (No NVMe).

Key Features

2-in-1 Versatility: One device supports both M.2 NGFF and mSATA form factors (selectable via switch).
Universal Fit: Matches standard 2.5-inch hard drive dimensions (10cm x 7cm) for easy installation in laptops or drive bays.
Broad M.2 Support: Compatible with 2230, 2242, 2260, and 2280 lengths.
Broad mSATA Support: Fits both Full-Height and Half-Height mSATA drives.
Plug & Play: No drivers required; compatible with Windows, Mac, and Linux systems.
SATA III Speed: Supports full 6Gbps bandwidth for maximum performance.
Safe Voltage: Supports 3.3V / 3A input for stable operation.

Full Product Description

Give Your Old SSDs a Second Life

Are you sitting on a pile of leftover M.2 or mSATA drives from old laptop upgrades? The 2-in-1 Adapter Enclosure is the ultimate tool for IT professionals, gamers, and DIY enthusiasts. It transforms your specialized form-factor drives into a universal 2.5-inch SATA SSD, compatible with almost any desktop, laptop, or game console.

Dual Interface, One Simple Solution

Unlike standard adapters that only fit one type of drive, this versatility champion houses slots for both M.2 NGFF and mSATA SSDs. Whether you are cloning an old boot drive or building a portable external storage unit, this enclosure handles it all.

Hardware Switch for Precision Control

To ensure data safety and stability, this adapter utilizes a physical Dip Switch. While you can physically mount both an M.2 and an mSATA drive simultaneously, the switch allows you to toggle between them instantly without removing the case.

Switch UP: Activates M.2 NGFF Mode.
Switch DOWN: Activates mSATA Mode.

Zero Speed Loss

This adapter is a pure bridge—it contains no throttling chips. It connects your drive directly to the SATA III interface, supporting transfer speeds up to 6Gbps. Your drive will run at its full potential, just as if it were plugged natively into a motherboard.

Important Compatibility Note

To ensure this product works for you, please verify your M.2 drive:

YES: Supports M.2 SATA Protocol (Key B or Key B+M).
NO: Does NOT support M.2 NVMe or PCIe AHCI (Key M).

Technical Specifications

Product Type: SSD adapter / enclosure
Output interface: SATA III (SATA 3.0), 22‑pin (7+15)
Input slot A: M.2 NGFF, SATA protocol only, B‑Key / B+M Key
Input slot B: mSATA (Mini‑SATA)
Supported M.2 sizes: 2230 / 2242 / 2260 / 2280 mm
Supported mSATA sizes: Full‑height and half‑height modules
Max transfer rate: Up to 6 Gbps (depends on SSD speed)
Dimensions: 100 mm × 70 mm × 7 mm (standard 2.5" size)
Mode switching: Physical DIP switch – up for NGFF M.2, down for mSATA

Delivery Options

Local delivery within Hong Kong and in-store pickup.
Free shipping for orders of HK$400 or above; HK$35 shipping fee for orders below HK$400.
Shipped by SF Express, usually dispatched the same day for orders confirmed before 6:00 PM (Mon–Sat).
Estimated delivery time: 1–3 business days after dispatch (Hong Kong).
In-store pickup details (location and time) will be confirmed by email or phone message.
Delivery times are estimates and may be affected by weather or unforeseen circumstances.

FAQ Section

Q: Can I use both the M.2 and mSATA drives at the same time?
A: No. While you can physically plug both drives into the board for safe storage, the system can only read one drive at a time. You must use the physical switch on the board to select which drive (M.2 or mSATA) is active.

Q: Will this work with my Samsung 970 EVO or WD Black NVMe drive?
A: No, it will not. This adapter only supports M.2 drives using the SATA protocol (usually notched with two gaps, B+M Key). It does NOT support NVMe or PCIe drives (usually one gap, M-Key).

Q: Do I need to install specific drivers?
A: No drivers are needed. The adapter is transparent to the operating system. If your SSD is formatted, it will show up immediately. If the SSD is new, you may need to initialize it in Disk Management.

Target Users / Applications

IT Technicians: For data recovery from dead laptops with older SSD form factors.
PC Upgraders: Reusing old laptop SSDs to boost storage in a desktop PC.
Budget Gamers: converting cheap surplus M.2 SATA drives into game library storage.