Skip to product information
1 of 3

18V 20W Monocrystalline Solar Panel w/ Bracket & Alligator Clips

18V 20W Monocrystalline Solar Panel w/ Bracket & Alligator Clips

🔥 1 sold•✓ In stock
Regular price $773.00 TWD
Regular price Sale price $773.00 TWD
Sale Sold out
Shipping calculated at checkout.
Quantity

Short Product Description

This 18V 20W monocrystalline solar panel (Model YX20W) provides reliable off-grid DC power for charging 12V storage batteries via a solar charge controller. Measuring 40 x 35 x 1.7cm in a rigid aluminum frame, it delivers up to 1.11A at peak power (21.6V open-circuit voltage). The unit comes pre-wired with red and black alligator clips and includes a metal mounting bracket and screws for quick installation on village house roofs, sheds, boats, and outdoor IoT boxes.

Key Features

  • 20W (18V / 1.11A) Monocrystalline Cells: Delivers stable DC charging power tailored for 12V battery systems via a solar controller.
  • Rigid Aluminum Frame (40 × 35cm): 17mm thick aluminum border protects the panel during outdoor mounting.
  • Pre-Wired Alligator Clips: Fitted with heavy-duty red (+) and black (-) clips for fast battery or controller hookup.
  • Includes Metal Mounting Bracket: Comes with a U-shaped support bracket and mounting screws for angled installation.
  • Built-In Safety Labeling: Clearly lists Voc (21.6V), Isc (1.33A), and Class II electrical protection for accurate system sizing.

Full Product Description

18V 20W Monocrystalline Output for 12V Battery Systems

Built with monocrystalline silicon photovoltaic cells inside a 400 x 350 x 17mm aluminum frame, this YX20W panel delivers 20W peak power (Vm: 18V, Im: 1.11A, Voc: 21.6V, Isc: 1.33A). The 18V operating voltage is specifically matched to charge 12V lead-acid or compatible 12V battery banks when paired with a solar charge controller. It is a practical power source for maintaining 12V backup batteries, powering off-grid Arduino/ESP32 weather stations, garden lighting, and remote CCTV setups.

Pre-Wired Alligator Clips and Included Mounting Bracket

To simplify field setup, the rear junction box comes pre-wired with a dual-color cable (Red + and Black -) terminated in insulated alligator battery clips. Inside the rear frame, the kit also includes a pre-drilled U-shaped metal mounting bracket and mounting hardware (screws and nuts), allowing you to angle the panel toward sunlight on fences, rooftops, or wall brackets without sourcing separate mounting rails.

Technician Tip

Never clip this 18V solar panel directly onto a 12V battery or sensitive electronics without a solar charge controller in between. Our technicians at Sun Cheong emphasize that its open-circuit voltage reaches 21.6V in bright sun, which can overcharge and damage a 12V battery or burn out 12V devices if left unregulated—and as printed on the rear safety label, do not connect this panel to 24V or higher systems, do not short the clips, and do not immerse the panel in water. If you need to wire into a charge controller's screw terminals, simply trim off the alligator clips, strip the ends cleanly, and insulate all connections properly.

Technical Specifications

  • Model: YX20W
  • Cell Type: Monocrystalline Silicon
  • Maximum Power (Pmax): 20W
  • Maximum Power Voltage (Vm): 18V DC
  • Maximum Power Current (Im): 1.11A
  • Open-Circuit Voltage (Voc): 21.6V DC
  • Short-Circuit Current (Isc): 1.33A
  • Max System Voltage / Overcurrent Rating: 60V / 1.11A
  • Electrical Protection Class: Class II
  • Dimensions: 400mm x 350mm x 17mm (40cm x 35cm x 1.7cm)
  • Output Connection: Pre-wired Red (+) / Black (-) cable with Alligator Clips
  • Included Accessories: U-Shaped Metal Mounting Bracket & Mounting Screws

Delivery Options

  • Local delivery within Hong Kong and in-store pickup.​
  • Free shipping for orders of HK$400 or above; HK$35 shipping fee for orders below HK$400.​
  • Shipped by SF Express, usually dispatched the same day for orders confirmed before 6:00 PM (Mon–Sat).​
  • Estimated delivery time: 1–3 business days after dispatch (Hong Kong).​
  • In-store pickup details (location and time) will be confirmed by email or phone message.​
  • Delivery times are estimates and may be affected by weather or unforeseen circumstances.​

FAQ Section

  • Can I clip this 18V 20W solar panel directly onto my 12V car or deep-cycle battery without a controller?No, the rear safety label states you must pair this 18V panel with a solar charge controller when charging a 12V battery, because its 21.6V open-circuit voltage can overcharge and damage the battery.
  • Can I connect two of these 18V solar panels in series for a 24V battery system?No, the manufacturer's safety label explicitly warns not to connect this module to 24V or higher power systems.
  • Does this solar panel come with mounting hardware and cables?Yes, the panel comes with a pre-wired red and black alligator-clip cable attached to the junction box, plus a U-shaped mounting bracket and a set of screws.
  • Can I pick up this 20W solar panel along with a PWM or MPPT solar charge controller at your Sham Shui Po store?Yes, you can pick up this 18V 20W solar panel alongside compatible 12V solar charge controllers and battery terminals at our Sham Shui Po shop (新昌電腦有限公司).
  • Can this solar panel be submerged in water or used directly as a 12V DC power supply for a router?No, the label warns not to immerse the unit in water, and solar panel voltage fluctuates with sunlight—always run a solar charge controller and 12V battery to deliver steady power to a router or camera.

Target Users / Applications

  • Hong Kong village house and shed owners maintaining 12V backup batteries for outdoor gates, garden lights, or security cameras.
  • STEM students, IoT makers, and hobbyists powering remote Arduino/ESP32 weather stations or battery-backed sensors off-grid.
  • Boat, camper, and car owners using a compact 20W panel with a charge controller to trickle-charge 12V starter or auxiliary batteries.
View full details