FNIRSI 2C23T 3 in 1 Multimeter Digital Oscilloscope Function Signal Generator 9999counts AC DC Voltage 50MS/s 10MHz Dual Channel
Feature:
- Dual-channel three-in-one digital oscilloscope: multimeter + oscilloscope + signal generator
- Dual-channel 2X10MHz bandwidth, isolated channels are independent of each other to avoid interference between each other, and signal detection is more accurate
- Oscilloscope performance: The hardware architecture adopts the same ARM+FPGA+high-speed ADC solution as that of desktop computers. It has high cost and is an unusual CPU direct acquisition solution. It has a powerful trigger system and has super waveform capture capabilities without losing waveform details.
- One-key measurement: It has complete trigger modes: automatic, single, and regular. Equipped with efficient one-key automatic adjustment, the measured signal waveform can be displayed without cumbersome adjustments.
- Built-in dual fuses with intelligent anti-burn protection and overload protection will not burn the meter: Intelligent anti-burn power measurement is safer and even novices can measure easily!
Basic parameters:
Model: 2C23T
Screen: 2.8-inch true color screen
Resolution: 320*240
Charging: TYPE-C (5V/1A)
Battery: 3000mAh lithium battery
Supported functions: oscilloscope, signal generator, digital multimeter (see functional parameters for details)
Standby time: 8 hours (laboratory theoretical maximum)
Multimeter parameters:
DC voltage: 9.999V/99.99V/999.9V, accuracy: ±(0.5%+3)
AC voltage: 9.999V/99.99V/750.0V, accuracy: ±(1%+3)
DC current: 9999uA/99.99mA/999.9mA/9.999A, accuracy: ±(1.2%+3)
AC current: 9999uA/99.99mA/999.9mA/9.999A, accuracy: ±(1.5%+3)
Resistance: 9.999MΩ/999.9KΩ199.99KΩ19.999KΩ/999.9Ω, accuracy: ±(0.5%+3)
99.99MΩ, accuracy: ±(1.5%+3)
Capacitance: 999.9uF199.99uF/9.999uF/999.9nF/99.99nF9.999nF, accuracy: ±(2.0%+5)
9.999mF/99.99mF, accuracy: ±(5.0%+20)
Temperature: (-55~1300℃/(-67~2372℉), accuracy: ±(2.5%+5)
Diode:√
On/off:√
Live line detection:√
Oscilloscope parameters:
Channel: dual channel
Sampling rate: 50M
Analog bandwidth: 10M (dual channel independent 10M)
Storage depth: 32kb
Input impedance: 1MΩ
Time base range: 50ns-10s
Vertical sensitivity: 20mV/div-10V/div (X1 level)
Maximum measurement voltage: ±400V
Trigger mode: automatic, normal, single
Trigger type: rising edge, falling edge
Display mode: YT/Scroll
Coupling: AC/DC
Waveform screenshot saving: supported
View waveform on computer: supported
Function signal generator parameters:
Channel: single channel
Frequency: 1Hz-2MHz
Amplitude: 0.1-3
Package Included:
Host*1+Manual*1+Probe*1+Alligator clip probe*1+Multimeter lead cable*1+Type-C charging cable*1
FNIRSI 2C23T User Guide:
https://www.mediafire.com/file/8ra2oyi4de7v6zm/2C23T_User_Guide.pdf/file