Lead-Free PCB Cleaning Water with Brush | 100ml
Lead-Free PCB Cleaning Water with Brush | 100ml
Couldn't load pickup availability
Short Product Description
Short Product Description
The Conduction CDX01 is a 100ml lead-free PCB cleaning solution designed for safe and efficient flux removal. Formulated to dry quickly without leaving any white residue, it safely cleans mobile phone logic boards, computer motherboards, and hardware components without corroding delicate SMD parts or plastics. Featuring a precision applicator tip and an included cleaning brush, this versatile cleaner is available in-stock at Sun Cheong Computer Co. Ltd. (新昌電腦有限公司) in Sham Shui Po.
Key Features
Key Features
- No White Residue: Advanced fast-drying formula evaporates cleanly, leaving no chalky residue on your circuit boards.
- Non-Corrosive: Completely safe for use on PCBs, SMD components, and plastic connectors without causing degradation.
- Precision Dispenser: The bottle is equipped with a fine needle tip, allowing for accurate, drop-by-drop application to prevent waste.
- Included Cleaning Brush: Comes with a dedicated wooden-handle bristle brush for immediate manual scrubbing.
- Multi-Method Cleaning: Suitable for manual brushing, direct soaking, and ultrasonic cleaner machines.
- Multi-Purpose Use: Effectively removes soldering flux, hardware oil stains, and stubborn double-sided tape residue.
Full Product Description
Full Product Description
Fast-Drying Formula with Zero White Residue
This professional-grade PCB cleaning water is engineered to dissolve stubborn rosin flux, solder paste residues, and oil stains instantly. Unlike lower-quality solvents that leave a chalky white film after evaporation, the Conduction CDX01 features a highly refined, fast-drying formula that leaves your circuit boards looking factory-new. This ensures optimal electrical conductivity and prevents long-term corrosion on your sensitive electronic repairs.
Non-Corrosive and Safe for Delicate Components
Safety and material compatibility are critical when cleaning densely packed logic boards. This lead-free, eco-friendly solution is strictly formulated to be non-corrosive. It will not damage or degrade PCB fiberglass, copper traces, delicate SMD components, or surrounding plastic connectors. You can confidently use it on expensive mobile phone motherboards, computer GPUs, and intricate DIY electronics.
Versatile Application for Any Repair Scenario
Whether you are performing a quick spot-clean or a full board restoration, this cleaner adapts to your workflow. The bottle features a precision needle-tip dispenser for targeted application directly onto solder joints. It supports manual scrubbing with the included wooden-handle brush, full submersion soaking for heavily soiled parts, and is completely safe for use inside ultrasonic cleaning machines for deep, automated flux removal.
Technician Tip
For the most efficient flux removal after soldering, apply a few drops of the CDX01 cleaner directly onto the affected area using the precision tip. Wait 3 to 5 seconds for the solvent to break down the rosin, then gently scrub the area with the included brush. Always use this product in a well-ventilated workspace. If you are setting up a professional repair bench, visit our physical store at Sun Cheong Computer Co. Ltd. in Sham Shui Po to explore our full range of soldering irons and flux.
Technical Specifications
Technical Specifications
- Brand: Conduction
- Model: CDX01
- Product Type: Lead-Free PCB Cleaning Water (Flux Remover)
- Capacity: 100ml
- Residue Profile: Leaves no white residue (Fast-drying)
- Corrosiveness: Non-corrosive to PCBs, components, and standard plastics
- Supported Cleaning Methods: Manual brushing, Soaking, Ultrasonic cleaning
- Included Accessories: 1x Precision applicator tip cap, 1x Wooden-handle cleaning brush
Delivery Options
Delivery Options
- Local delivery within Hong Kong and in-store pickup.
- Free shipping for orders of HK$400 or above; HK$35 shipping fee for orders below HK$400.
- Shipped by SF Express, usually dispatched the same day for orders confirmed before 6:00 PM (Mon–Sat).
- Estimated delivery time: 1–3 business days after dispatch (Hong Kong).
- In-store pickup details (location and time) will be confirmed by email or phone message.
- Delivery times are estimates and may be affected by weather or unforeseen circumstances.
FAQ Section
FAQ Section
Will this cleaner leave a white film on my motherboard?
No, the Conduction CDX01 is specifically formulated to prevent this common issue. Its highly refined, fast-drying composition ensures that once the flux is dissolved and the solvent evaporates, no white chalky residue is left behind on the PCB.
Is it safe to use on plastic connectors and ribbon cables?
Yes, this cleaning water is non-corrosive and safe for use around standard electronic plastics, ribbon cables, and SMD components. It will not melt or degrade the plastic housings of your motherboard connectors.
Can I use this solution in my ultrasonic cleaner?
Absolutely. This cleaning water is fully compatible with ultrasonic cleaning machines. Using it in an ultrasonic bath is highly recommended for deep-cleaning heavily oxidized boards or removing flux from underneath BGA chips.
How do I use it to remove double-sided tape residue?
Apply a few drops of the cleaner directly onto the sticky tape residue and let it soak for about 10 to 15 seconds. The solvent will break down the adhesive, allowing you to easily wipe or scrape it away without damaging the underlying surface.
Is this PCB cleaner available for immediate pickup in Hong Kong?
Yes, we stock the Conduction CDX01 100ml PCB Cleaning Water at our Sham Shui Po physical store. You can order it online for delivery or drop by during business hours for instant pickup.
Target Users / Applications
Target Users / Applications
- Mobile Phone Repair Technicians: Cleaning flux residue off densely packed logic boards after micro-soldering IC chips.
- PC Builders & Modders: Restoring water-damaged computer motherboards or cleaning GPUs before applying new thermal paste.
- DIY Electronics Makers: Removing rosin flux from custom Arduino or Raspberry Pi prototype boards to ensure clean solder joints.
- Hardware Restorers: Degreasing small metal hardware parts or removing stubborn double-sided adhesive from device casings.
