3-6V High Voltage Generator High Voltage Module Voltage Inverter Transformer Boost Module 3-6V 400KV
Size: length 56 * diameter 24 * cut diameter 21mm
Input parameters: 3.7-6V 4A Input line length: about 10 cm
Output parameters: 400KV 0.5A wire length: 8cm or so
High-voltage bipolar discharge distance: 1 cm - 2 cm
About the input power: single 3.7V lithium battery or two in series, such as 18650 batteries, or NiCd / NiMH battery pack, 4V or 6V lead-acid batteries, etc. (6V battery can achieve the best results)
Product use: The module is divided into input and output, red and black (green) wire is the input, red positive black (green) negative, two thick high voltage wire of the same color(red) is output.
Module use precautions.
1, high-voltage module should be avoided when the high-voltage no-load energized use, the power must be adjusted before the appropriate distance from the end of the high-voltage line, high-voltage line arc distance and the use of battery voltage and capacity is proportional.
2 ,est arc distance from short to long experiment, energized strictly prohibited beyond the longest arcing distance, due to the high voltage energy can not be released, it is very easy to damage the module.
3, the module's power is large, the internal should not be heat dissipation, so it should not work for a long time.
4, to determine whether the battery capacity can drive the output of the maximum power is to measure the battery voltage when pulling the arc. If in about 6V can output the maximum power.
5, the small capacity of the lithium battery two in series for 7.2V, in the pulling arc state measurement voltage has fallen to about 4V, the smaller the capacity the lower the voltage pulling. Therefore, it is recommended to use more than 2000MA lithium, the best conditions with more than 4000MA battery.