Skip to product information
1 of 2

10S 36V 20A Ternary Li-ion BMS Protection Board (Same-Port, NTC)

10S 36V 20A Ternary Li-ion BMS Protection Board (Same-Port, NTC)

🔥 1 sold•✓ In stock
Regular price HK$79.00
Regular price Sale price HK$79.00
Sale Sold out
Shipping calculated at checkout.
Quantity (1 in cart)

Short Product Description

This 10S 36V 20A Same-Port BMS Protection Board is engineered for 10-series ternary Li-ion (3.6V/3.7V, 42V full charge) battery packs. Delivering 20A continuous charge and discharge current with an 80A peak rating, it features hardware cell balancing, an external NTC temperature sensor, and conformal-coated protection against moisture and short circuits. Measuring 62 x 50 x 10mm with pre-soldered 14AWG silicone power leads and an 11-pin balance harness, it is ideal for e-scooters, e-bikes, and power tools.

Key Features

  • 20A Continuous / 80A Peak: Supports 20A charge, 20A discharge, and up to 80A startup surges for 36V (42V max) e-mobility motors.
  • External NTC Temperature Probe: Monitors live cell pack temperature to prevent overheating during heavy loads or charging.
  • Same-Port (C-) Wiring: Uses one shared negative output (Blue 14AWG) for both charging and discharging, reducing external harness clutter.
  • Hardware Balancing & Conformal Coating: Equalizes cell voltages while sealing the PCB against humidity, dust, and vibration.
  • Pre-Soldered 14AWG Silicone Leads: Fitted with flexible 200°C 14AWG main wires (Black B-, Blue C-) plus an 11-pin 10S balance harness.

Full Product Description

10S 36V 20A Same-Port Protection with Cell Balancing

Built around a blue aluminum heatsink and conformal-coated PCB (62 × 50 × 10mm), this 10S ternary lithium BMS (PZY10BS4152020100P3-3D) handles 20A continuous charging, 20A continuous discharging, and up to 80A instantaneous surge current. It integrates overcharge, over-discharge, overcurrent, overvoltage, short-circuit, and reverse-charge protection alongside passive cell balancing to keep all 10 cell groups aligned. Because it uses a Same-Port (同口) design, both charging and discharging share the pre-soldered 14AWG (200°C silicone) negative lead—Black (B-) to pack negative and Blue (C-) to the shared charge/discharge plug negative—simplifying battery pack wiring.

External NTC Thermal Sensor and Pre-Wired 14AWG Leads

Unlike basic protection boards without thermal feedback, this module includes an external NTC temperature probe on dual white 22AWG leads so you can tape it directly onto the battery cells for active overheat cutoff protection. The PCB comes sealed with conformal coating, paired with an aluminum heatsink plate on top, a black insulating backplate, and a complete 11-pin balance harness (B0 black wire + B1 through B10 red wires) ready for 10S 18650 or 21700 battery pack builds.

Technician Tip

Always wire the 11-pin balance harness strictly in sequential order (B0 to Pack-, then B1 through B10 across each cell positive junction up to Pack+) and verify every pin voltage with a multimeter before plugging the white JST connector into the BMS. Our technicians at Sun Cheong remind builders that this 10S ternary board (42V full charge) must be paired exclusively with a 42V lithium charger (not for 3.2V LiFePO₄ cells or lead-acid chargers), and that you must solder B- (Black 14AWG) before plugging in the balance cable to protect the onboard IC.

Technical Specifications

  • Brand / Model: 平智源 (PZY) / PZY10BS4152020100P3-3D (PZY10BS4 REV1)
  • Battery Configuration: 10S Ternary Li-ion (36V nominal, 42V full charge; NOT for 3.2V LiFePO₄)
  • Port Type: Same-Port (C- shared charge & discharge negative)
  • Continuous Current: 20A Charge / 20A Discharge
  • Instantaneous Peak Current: 80A
  • Protection Functions: Overcharge, Over-discharge, Overcurrent, Short-circuit, Overvoltage, Reverse-charge, External NTC Temperature Control
  • Additional Features: Hardware Cell Balancing, Conformal Coating, Aluminum Heatsink
  • Pre-Soldered Power Wires: 14AWG 200°C Silicone (Black: B- / Blue: C-)
  • Balance Harness: 11-Pin JST (B0 Black + B1–B10 Red)
  • Dimensions: 62mm x 50mm x 10mm

Delivery Options

  • Local delivery within Hong Kong and in-store pickup.​
  • Free shipping for orders of HK$400 or above; HK$35 shipping fee for orders below HK$400.​
  • Shipped by SF Express, usually dispatched the same day for orders confirmed before 6:00 PM (Mon–Sat).​
  • Estimated delivery time: 1–3 business days after dispatch (Hong Kong).​
  • In-store pickup details (location and time) will be confirmed by email or phone message.​
  • Delivery times are estimates and may be affected by weather or unforeseen circumstances.​

FAQ Section

  • Can I use this 10S 36V 20A BMS board with 10S 3.2V LiFePO4 battery cells?No, this BMS is designed specifically for 10S 3.6V/3.7V ternary lithium-ion packs (36V nominal, 42V max) and is not compatible with 3.2V LiFePO4 cells.
  • How do I wire the charger and motor load on a Same-Port BMS without using the P- pad?Connect your pack's total positive directly to the shared charger/load positive plug, connect the black 14AWG B- wire to pack negative, and connect both charger negative and load negative to the blue 14AWG C- wire.
  • What is the small white two-wire probe attached to this 10S BMS board?It is an external NTC temperature probe that should be taped against the center of your battery cells to provide thermal protection against overheating.
  • Can I pick up this 10S 36V 20A BMS along with heat shrink wrap and XT60 plugs at your Sham Shui Po store?Yes, you can pick up this 10S 20A BMS board alongside PVC heat shrink wrap, insulating tape, and XT60 connectors at our Sham Shui Po shop (新昌電腦有限公司).
  • Why does one reference diagram show 13 cells while my board has an 11-pin balance plug?The reference diagram is a generic illustration omitting middle cells, whereas this 10S board includes an 11-pin balance harness (B0 black plus B1 through B10 red) matching a 10-series battery pack.

Target Users / Applications

  • E-scooter and e-bike technicians repairing or rebuilding 36V (10S, 42V) lithium-ion battery packs.
  • DIY power pack builders assembling 10S 18650 or 21700 battery modules for electric skateboards, cordless garden tools, or 36V robotics.
  • Battery pack assemblers needing a pre-wired, conformal-coated BMS with NTC thermal sensing for compact enclosures.
View full details