100g Green Oil UV Solder

100g Green Oil UV Solder Mask BGA PCB Motherboard Paint Prevent Corrosive Arcing Soldering Paste Flux Ink Repair Tools

Feature:

• Good film-forming toughness, after curing, it plays a role of insulation and protection
• Insulate and protect electronic components in the later stage of welding, repair computer, mobile phone PCB circuit board solder mask peeling or partial damage, fix insulating enameled wire, protect components.
• Scope of application: PCB circuit board/Cell phone Motherboard/computer Motherboard/Appliance Repair, etc.

Specification:

Material: Solder Mask

Capacity: 100g

Color: green oil

Dielectric Strength: >500V/mil

Curing Condition: UV light

Note: This product is sensitive to ultraviolet rays and needs to be stored strictly away from light

Instructions:

1. When the PCB circuit is broken during the maintenance of the computer or mobile phone, first use the enameled wire to solder the flying wire;
2. Prepare tools (such as brushes) and green oil;
3. Squeeze a little bit of green oil onto the brush, and then evenly apply a layer of green oil on the PCB board;
4. Put it in the natural state for a few hours. If possible, you can irradiate it with ultraviolet light for a few minutes. Shake the PCB board to observe that the ink is no longer flowing. The green oil will fix the lead well and play a good insulation effect.

Package Included:

1 * Green Oil UV Solder Mask

1 * Brush