433MHz RF Remote Control Switch AC 110V 220V 240V 85V-260V Light Lamp LED Bulb Wireless Switches Corridor Room Wall Panel Switch
Working Voltage: AC85V-260V
( AC85V AC100V AC110V AC120V AC220V AC230V AC240V AC260V all is ok )
Working Frequency: 433MHZ
Quiescent Current: less than 10mA
Working Temperature: -10'c-+60'C
Receiving sensitivity :-105dBm
Working Distance: 10-100m
Modulation Mode：Superheterodyne
Max Load : 10A Relay have 10A Relay, Resistive load≤5A,Inductive load≤3A
Matching Mothod: Learning Button to add transmitter
Working Mode: Momentary /Toggle /Latched /Momentary delay off 5s/10s/15s
Board Size：55mm*32mm*17mm
Case Size： 73mm*36mm*23mm
Wiring
IN
L------Input AC85V-260V Live Wire (L)
N-----Input AC85V-260V Neutral Wire (N)
OUT
L------Ouput AC85V-260V Live Wire (L)
N-----Output AC85V-260V Neutral Wire (N)
Momentary----- Press and Hold---ON, Release----OFF
Toggle-------Press one time ----ON. Press it again ----OFF
Latched--------Press A ----ON, Press B-----OFF
Momentary 5s/10s/15s ---------Press and Hold---ON, Release 5s/10s/15s Delay -----OFF
Learning Code
Input AC85V-260V for Receiver to work ,
Momentary-----Press the learning button for 1 Time, LED indicator ON, then Press the transmitter. LED indicator flash
Toggle-----------Press the learning button for 2 Time, LED indicator ON, then Press the transmitter. LED indicator flash
Latched---------Press the learning button for 3 Time, LED indicator ON, then Press the transmitter. LED indicator flash
Momentary 5s/10s/15s time Delay OFF------
Press the learning button for 4/5/6 Time, LED indicator ON, then Press the transmitter. LED indicator flash
Clearing Code
Input AC85V-260V for Receiver to work ,press the learning button for 8 times, LED indicator flash for 6 times, code have cleared.
(Note: if you need change working mode, turn off the power ,and turn on again to clear the code and re-learn again)
Package Included:
220v Recevier Module x 1
86 Remote Switch Panel x 1