Mini motor Remote Control Switches Small Tiny Motor RF Wireless Controller Forwards Reverse Stop RX TX 433 magnet Coil Remote
This is micro-motor forward and reverse Remote controller, it input DC3V-12V output DC3V-12V , to control the output positive (VCC+) and negative(GND-) exchange, voltage from DC3V to 12V all voltage is ok , MOS non-contact （Contactless) (No Noise ) silent receiver, Volume 21mm * 11mm * 5mm, ultra-low power standby current is only 0.5mA, it is suitable for battery-powered motor, especially the door mini motor which with a small battery-powered.
Working voltage: DC3V-12V ( if battery please more than DC3.7V)
(Wide working voltage DC3V-12V , 3.3V 3.6V 3.7V 4.5V 5V 6V 7.4V 9V 12V All are ok)
Working current: 6ma
Standby current: 0.5ma
(Ultra low standby current, it is suitable for battery-powered, when it is standby will automatically enter the low-power sleep state, please press the remote control button hold for 0.5 seconds or more)
Maximum load: 0.4A (400ma mA) have better load less than 0.2A (200ma mA)
(The receiver itself with overcurrent protection, when the current exceeds the rated current, will be entered into turn off power protection, such as the motor to start or block the current is doubled, beyond the rated current will be flash)
Operating frequency: 433.92MHZ
Size: 21 * 11 * 5mm
Momentary-----------Press and hold the "Up" button,Motor Forwards , Press and hold the "Down" button the Motor Reverse .
Latched-----------Press the "Up" button for one time ,Motor Forwards , Press "Stop" Button to stop . Press the "Down" button for one time the Motor Reverse .Press "Stop" Button to stop
it is the world's smallest motor controller, the motor's voltage and current goes through the receiver, before your purchase .please measure your motor exact working voltage and Current .thank you for your cooperation.