Use for : North-south bridge video card heat dissipation part
Used to paste heat sink with IC chips,and be cooling body with good thermal effect
Model : STARS-922
Net Weight: 5g
Thermal conductivity : >0.671 W/m-k
Thermal resistance : <0.06 °C-in2/W
- When it is used, the product is directly extruded, rubbed and glued to the surface of the adhesive, and then covered immediately after the test, so as to be tried again.
- The surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing rate is, the slower the vice versa.
- Recommended coating thickness: 0.1-0.5mm, the thinner the better.
- Before use, please clean with solvent (such as alcohol) adhesive surface, detergents should be surface to be clean before painting.