{"product_id":"l298-2-route-motor-driver-module-160w-7a","title":"L298 2 Route Motor Driver Module - 160W 7A High Power H-Bridge","description":"\u003cp data-sourcepos=\"11:1-11:738\"\u003eThe L298 2 Route Motor Driver Module is a robust dual H-bridge driver designed to control two DC motors simultaneously. With a powerful 7A rated output current per channel (50A peak), and a total power handling of 160W, this module is an excellent choice for demanding robotics, automation, and DIY projects that require precise and high-power motor control. It features a wide input voltage range of 6.5V to 27V and incorporates signal optocoupler isolation for enhanced protection and reliable performance, even in environments with electromagnetic interference. Its stable and industrial-grade design includes electrostatic discharge circuits, ensuring durability and compliance with electromagnetic compatibility (EMC) specifications.\u003c\/p\u003e\n\u003cp data-sourcepos=\"13:1-13:17\"\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-sourcepos=\"15:1-23:0\"\u003e\n\u003cli data-sourcepos=\"15:1-15:88\"\u003e\n\u003cstrong\u003eDual H-Bridge Design:\u003c\/strong\u003e Capable of driving two independent DC motors simultaneously.\u003c\/li\u003e\n\u003cli data-sourcepos=\"16:1-16:136\"\u003e\n\u003cstrong\u003eHigh Current \u0026amp; Power:\u003c\/strong\u003e Each motor interface offers a rated output current of 7A (50A peak), with a module power rating of 160W.\u003c\/li\u003e\n\u003cli data-sourcepos=\"17:1-17:89\"\u003e\n\u003cstrong\u003eWide Voltage Input:\u003c\/strong\u003e Operates reliably with a power supply voltage from 6.5V to 27V.\u003c\/li\u003e\n\u003cli data-sourcepos=\"18:1-18:182\"\u003e\n\u003cstrong\u003eOptocoupler Isolation:\u003c\/strong\u003e Signal input is isolated by optocouplers, providing superior anti-interference capabilities and protecting your control signals from high-power circuits.\u003c\/li\u003e\n\u003cli data-sourcepos=\"19:1-19:85\"\u003e\n\u003cstrong\u003eUndervoltage Protection:\u003c\/strong\u003e Built-in protection ensures stable and safe operation.\u003c\/li\u003e\n\u003cli data-sourcepos=\"20:1-20:125\"\u003e\n\u003cstrong\u003ePWM Speed Control:\u003c\/strong\u003e The enable terminal (ENA) supports PWM input (0-10KHz frequency) for precise motor speed regulation.\u003c\/li\u003e\n\u003cli data-sourcepos=\"21:1-21:162\"\u003e\n\u003cstrong\u003eIndustrial Grade Reliability:\u003c\/strong\u003e Designed for stability and reliability, featuring electrostatic discharge circuits and EMC compliance for robust applications.\u003c\/li\u003e\n\u003cli data-sourcepos=\"22:1-23:0\"\u003e\n\u003cstrong\u003eCompact Size:\u003c\/strong\u003e Product dimensions are 55 x 55 x 16mm (Length x Width x Height).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-sourcepos=\"24:1-24:23\"\u003e\u003cstrong\u003eProduct Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-sourcepos=\"26:1-32:0\"\u003e\n\u003cli data-sourcepos=\"26:1-26:190\"\u003e\n\u003cstrong\u003eMotor Interfaces:\u003c\/strong\u003e Dual channels, each with 7A rated output current (50A peak). (Note: Motor interfaces must not be short-circuited; a 10A fuse in series is recommended for protection).\u003c\/li\u003e\n\u003cli data-sourcepos=\"27:1-27:217\"\u003e\n\u003cstrong\u003ePower Supply Voltage:\u003c\/strong\u003e 6.5V - 27V (Crucially, the power supply must not be connected in reverse or exceed 27V, as this may burn out the module. It is recommended to use a 15A fuse in series with the power input).\u003c\/li\u003e\n\u003cli data-sourcepos=\"28:1-28:41\"\u003e\n\u003cstrong\u003eWorking Temperature:\u003c\/strong\u003e -25°C to 80°C.\u003c\/li\u003e\n\u003cli data-sourcepos=\"29:1-29:104\"\u003e\n\u003cstrong\u003ePWM Frequency Range:\u003c\/strong\u003e 0 - 10KHz, with a minimum PWM duty cycle of ten beats for reliable operation.\u003c\/li\u003e\n\u003cli data-sourcepos=\"30:1-30:112\"\u003e\n\u003cstrong\u003eControl Signal Voltage:\u003c\/strong\u003e 3V - 6.5V (applies to the enable signal and the positive\/reverse control signals).\u003c\/li\u003e\n\u003cli data-sourcepos=\"31:1-32:0\"\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Mounting hole diameter is 3mm. Pay attention to prevent short circuits on the back of the circuit board; you can add an insulation pad or copper standoff to raise the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-sourcepos=\"33:1-33:30\"\u003e\u003cstrong\u003eSuitable Motor Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-sourcepos=\"35:1-37:0\"\u003e\n\u003cli data-sourcepos=\"35:1-35:150\"\u003e\n\u003cstrong\u003eFor 12V Motors:\u003c\/strong\u003e Recommended for motors with a rated power of 40W or below, or a rated current of 7A or below for long-term, full-load operation.\u003c\/li\u003e\n\u003cli data-sourcepos=\"36:1-37:0\"\u003e\n\u003cstrong\u003eFor 24V Motors:\u003c\/strong\u003e Recommended for motors with a rated power of 115W or below, or a rated current of 7A or less for long-term operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-sourcepos=\"38:1-38:26\"\u003e\u003cstrong\u003eImportant Precautions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-sourcepos=\"40:1-46:0\"\u003e\n\u003cli data-sourcepos=\"40:1-40:246\"\u003e\n\u003cstrong\u003eDrive Power Connection:\u003c\/strong\u003e The drive power must not be reversed. It is highly recommended to connect a 15A fuse in series with the power connector. The voltage must be strictly between 6.5V and 27V; over-voltage can severely damage the module.\u003c\/li\u003e\n\u003cli data-sourcepos=\"41:1-41:188\"\u003e\n\u003cstrong\u003eMotor Interface Protection:\u003c\/strong\u003e Do not short-circuit the motor interface, as this can burn the driver module. A 10A fuse in series with each electrical interface is strongly recommended.\u003c\/li\u003e\n\u003cli data-sourcepos=\"42:1-42:249\"\u003e\n\u003cstrong\u003eForward\/Reverse Switching:\u003c\/strong\u003e When switching between forward and reverse directions, a braking period of at least 0.1 seconds is required before reversing. Do not attempt to commute while the motor is still rotating, as this may damage the drive.\u003c\/li\u003e\n\u003cli data-sourcepos=\"43:1-43:271\"\u003e\n\u003cstrong\u003ePower Supply Sizing:\u003c\/strong\u003e It is recommended that the rated output current of your power supply be at least twice the rated current of the motor. This ensures the power supply can provide the necessary voltage during motor startup, preventing power loss and motor pauses.\u003c\/li\u003e\n\u003cli data-sourcepos=\"44:1-44:585\"\u003e\n\u003cstrong\u003eMotor Generated EMF:\u003c\/strong\u003e When the drive module is powered down, do not directly or indirectly allow the motor to rotate at high speed, as the motor generated electromotive force (EMF) can burn the drive module. If your application requires high-speed motor rotation when the drive module is powered down, it is recommended to connect a relay in series with the driver's motor interface (using the Normally Open (NO) and Common (COM) terminals), with the relay coil sharing power with the driver. This way, when power is down, the relay will disconnect the drive and motor connection.\u003c\/li\u003e\n\u003cli data-sourcepos=\"45:1-46:0\"\u003e\n\u003cstrong\u003eEnvironmental \u0026amp; Handling:\u003c\/strong\u003e Do not expose the drive to moisture. Do not short-circuit any components on the drive board. Avoid touching the pins and pads on the board when powered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Sun Cheong Computer Company Limited","offers":[{"title":"Default Title","offer_id":44231244152983,"sku":"","price":324.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0440\/4022\/4919\/files\/l298-2-route-motor-driver-module-160w-7a-angled.jpg?v=1756030312","url":"https:\/\/scccltd.com\/en-tw\/products\/l298-2-route-motor-driver-module-160w-7a","provider":"Sun Cheong Computer Company Limited","version":"1.0","type":"link"}